GreenSensor by Prosensor

, 5 min de lectura

Compost and the circular economy: monitoring windrow temperature

Biowaste sorted at source is composted on platforms, then the compost is spread on soil. During composting, windrow temperature shows whether the material is transforming properly and whether the batch is sanitised. This article explains how to monitor it and keep a record.

From biowaste sorting to compost

In recent years, source separation of biowaste has become widespread across France. Food scraps and green waste are collected separately, then composted rather than landfilled or incinerated.

Composting produces an organic soil amendment. Spread on farmland, green spaces or gardens, compost adds organic matter, improves the soil’s water reserve and reduces the need for synthetic fertiliser.

Composting platforms receive this waste and turn it into compost.

What temperature shows

In a windrow, microorganisms break down the material and give off heat. The core temperature reflects their activity.

During fermentation, the temperature rises and stays high: this is what destroys pathogens and weed seeds (sanitisation). During maturation, it falls and stabilises.

A batch that does not rise enough, or not for long enough, is not sanitised. A batch that runs away indicates a lack of air or water.

The limits of manual readings

On many platforms, temperature is still taken by hand. An operator walks the windrows, pushes in a thermometer, notes the value and enters it later in a spreadsheet.

This method has three limits:

  • one reading a day at best, so nothing at night or over the weekend;
  • a round that takes longer as the number of windrows grows;
  • traceability that depends on record sheets and on each person’s rigour.

Monitor every windrow continuously

A connected temperature probe is pushed into the windrow and measures the core temperature. The GreenSensor probe reads the temperature every hour and sends the measurements by radio (LoRa) to a gateway.

On the web platform, each probe is assigned to a windrow and to a fermentation or maturation campaign. Curves are displayed in real time, and an SMS or e-mail alert is sent when a threshold is exceeded.

Turning and watering can then be decided from the measurements rather than a fixed calendar, and teams spend less time taking readings.

Document sanitisation batch by batch

A farmer or a local authority spreading compost may want to check that it was properly treated.

The hourly history of each campaign shows the temperature rise, the holding time and the maturation phase, batch by batch. Data can be exported and reports printed for an audit, a certification or a customer.

Data is archived automatically: it replaces the record sheets.

The GreenSensor probe

GreenSensor is designed and made in France by Prosensor, a temperature measurement specialist for over 30 years. 316L stainless steel rod, IP68 housing, 5 years of battery life. The probe is ready to use, with no heavy infrastructure to install.

Temperature shows the state of each batch. Measuring it every hour and keeping the history makes it possible to follow fermentation and document sanitisation.

¿Un proyecto de seguimiento de temperatura?

Un asesor de Prosensor le presenta GreenSensor y responde a sus preguntas.

Solicitar una demo